It was only a matter of time until we created the fattest Quad of them all, the Fat Quad! This fat BMX bike is centered around the unique Quadangle frame design featuring an oversized downtube, integrated head tube and a legendary looptail rear end. New this year is an upgrade to Tektro Auriga hydraulic disc brakes. One you go fat, you never go back…

Key Features

• 6061 auminum Quadangle frame design, internally-machined integrated head tube, symmetrical looptail rear end, 100mm bottom bracket, 170mm-spaced rear dropouts
• Full Cr-Mo Landing Gear forks with 135mm-spaced dropouts
• Vee Tire Co x SE Racing Chicane, 26″ x 3.50″ tires run fast and smooth at 30psi
• Oakley B1-B grips with SE donuts
• SE Flyer seat with bottle opener
• Cr-Mo SE Big Honkin cruiser bars
• External bottom bracket
• Tektro Auriga hydraulic disc brakes featuring dual pistons, automatic caliper positioning system, 160mm rear rotor, 180mm front rotor
• SE 3-piece V-Ridge cranks with alloy SE sprocket
• 35.8 pounds

• COLOR(S)	High Polish Silver
  FRAME	6061 Aluminum, Single Downtube Fat Quad Design, Internally-machined Integrated Head Tube, Looptail Rear End, Retro Dropouts, 100mm Euro Bottom Bracket, 170mm Spaced Dropouts, Disc Brake Tabs
  FORK	Landing Gear, Full Cr-Mo, Disc Tabs, 450mm Axle to Crown, 38mm Offset, 135mm Spaced Dropouts
  CRANKSET	SE V-Ridge 3-pc Cr-Mo Cranks,175mm, External Sealed Bearing Euro Bottom Bracket, 200mm Spindle length, 19mm Spindle Diameter, 27T Alloy SE Racing Sprocket
  PEDALS	X-Pedo Low-profile Platform w/ Removable Pins
  CHAIN	KMC S1
  WHEELSET	Alloy 36H Hubs, Sealed Rear, 135mm Front Hub & 170mm Rear Hub, w/ SE Bubble Fat 65mm Rims, 14T Cassette, Stainless Spokes
  TIRES	Vee Tire Co x SE Racing Chicane, 26″ x 3.5″, 72TPI, Front & Rear,
  BRAKESET	Tektro Auriga, Hydraulic Disc, Easy to Adjust Open System, Dual Piston, Automatic Caliper Positioning, 180mm Front Rotor, 160mm Rear Rotor
  BRAKE LEVERS	Tektro Auriga, 2-Finger Alloy, Front & Rear
  HEADSET	FSA Orbit CE, Sealed 1-1/8″ Integrated
  HANDLEBAR	Big Honkin’ Cr-Mo Cruiser Bar, 29″ x 7″, 12 Backsweep, 2 Upsweep
  STEM	Retro Alloy Top-Load w/ Engraved SE Logo on Top & Sides, 55mm Reach
  GRIPS	Special Edition ODI Mushroom II Grips, Made in USA, w/ SE Donuts
  SEAT	SE Flyer Seat w/ Custom SE Bottle Opener Brace
  SEATPOST	Micro-Adjust Alloy, 27.2mm
  SEAT CLAMP	SE Racing Champ Clamp, Alloy, 31.8mm Inner Diameter
  ACCESSORIES	Alloy Valve Caps, SE Chain Tensioners
  WEIGHT	35.8 lbs / 16.23 kgs

  *Specifications subject to change without notice

  GEOMETRY

  A	TOP TUBE, ACTUAL	22.2″
  B	SEAT TUBE, CENTER TO TOP	14.9″
  C	SEAT TUBE ANGLE	72
  D	HEAD TUBE ANGLE	70
  E	CHAINSTAY LENGTH	17.8″
  F	WHEELBASE	42.6″
  G	BOTTOM BRACKET HEIGHT	12.4″
  H	STANDOVER	30″
  	SUGGESTED RIDER SIZE	5’3″+ (160cm+)
  	STEM	55mm
  	HANDLEBAR WIDTH	29″
  	CRANK	175mm
  	WHEEL SIZE	26″
  	SEAT POST DIAMETER	27.2mm